Share how to use hot melt adhesive film

Tools/Materials:

Hot melt glue or hot melt adhesive mesh

Drum compound equipment

Complex machine

Iron or hot air dryer

How to operate:

1. How to use hot melt adhesive film or hot melt adhesive film: Use an iron to heat to complete the bonding of the materials. This method is mainly suitable for use in some handicrafts, DIY and tailor shops.

2. The second method of using hot melt adhesive film: Roller lamination equipment is currently a relatively popular type of hot melt adhesive film lamination equipment. When using this type of equipment to laminate hot melt adhesive film, there is a large error in the temperature in the general instrument temperature and the surface of the roller. When laminating products with hot melt adhesive film, it is necessary to ensure that the surface temperature of the roller is 10-50 degrees higher than the melting point of the hot melt adhesive film.

3. The third method of using hot melt adhesive film: There are actually many types of laminating machines. Some can only laminate on one side, some can laminate on both sides, and some can be configured to laminate multiple layers at the same time. The operation is relatively simple. Place the hot melt adhesive film or hot melt adhesive mesh in the middle of the materials that need to be compounded. Set the compounding environment of the compounding machine. The material enters from the feed port and comes out at the other end to complete the compound bonding. The laminating environment of the laminating machine can be adjusted according to the bonding effect, and the efficiency is higher than that of drum laminating equipment.